2023-06-18

How about the impact resistance of seamless square tube

Seamless square tube for the power supply as a leading agent of a component, high solid fraction of architectural coatings. Sub-primer and topcoat. A component consists of epoxy resin glue, color paste and filler, modifier.

2023-04-18

Key characteristics of seamless rectangular tubes

Seamless rectangular tubes possess excellent compressive strength, ductility, plastic deformation, and welding performance. They have good ductility, with a solid connection between the aluminum alloy layer and the steel base, allowing for processes such as cold extrusion and cold rolling. They exhibit excellent compressive strength, ductility, plastic deformation, and welding performance, along with good plasticity. The cable bending and other forming processes do not damage the coating, making them suitable for general processing such as punching, laser cutting, welding, and cold drawing. Key characteristics related to seamless rectangular tubes: 1. Rust prevention and corrosion resistance – The zinc immersion layer, zinc-rich phosphating treatment layer, and electrostatic coating all provide excellent rust prevention effects. Seamless rectangular tubes can generally ensure no rust for thirty years in extreme environments. 2. Strong weather-resistant electrostatic powder coating process uses solid powder that solidifies at high temperatures. This powder's properties are very stable, including those of liquid architectural coatings. Therefore, seamless rectangular tubes have excellent UV protection and will not fade under prolonged sunlight exposure. 3. Anti-disassembly: Anti-disassembly components are installed, and both the anti-disassembly components and the pipes have been tested by national technical units, with all indicators exceeding national industry standards. Due to the requirements of the working environment, the plates of galvanized rectangular tubes are mostly made from externally hot-dip galvanized rectangular tubes, further enhancing corrosion resistance. To ensure welding quality, the hot-dip galvanized layer on the surface of the galvanized steel pipe should be removed before welding. This is to eliminate the whitening of the hot-dip galvanized layer in the welding and heat-affected zones, ensuring welding quality and good working conditions for employees. Naturally, seamless rectangular tubes welded in this manner are only suitable for use in general working environments and are not recommended for operation in corrosive environments.

2023-04-15

Method of eliminating banded structure of seamless rectangular tube

The banded structure makes the part anisotropic, which reduces the elongation, area shrinkage and impact toughness values in the direction perpendicular to the banded structure. Banded tissue serious parts, heat treatment is easy to produce deformation, the same part of the hardness is not uniform, low carbon content of the parts of the quenching soft point. The reason for the formation of banded structure is the segregation of alloying elements in steel, especially the segregation of sulfur and phosphorus and various non-metallic inclusions, such as MnS and silicate inclusions, which are easy to form banded structure. The dendrite segregation produced during solidification of steel can not be eliminated in the later pressure processing process, which often keeps the banded structure. In addition, the hot tie and forging process is improper, especially without repeated forging, change direction flip forging, will also make the raw material banded structure preserved. The specific elimination methods of seamless rectangular tube are as follows: (1) The banded structure caused by component segregation, that is, when the steel contains harmful impurities such as phosphorus and is pressed, the impurities stretch along the rolling direction. When the steel is cooled to less than 4, these impurities become the core of ferrite so that the ferrite morphology is banded, and then the pearlite is banded. This banded structure can be eliminated by electroslag remelting and increasing the crystallization rate. (2) Banded structure caused by improper hot working temperature, I .e. when the hot working stop forging temperature is in the two-phase zone (between/4, and 40), ferrite is precipitated from austenite in a banded form along the metal flow direction, austenite that has not yet decomposed is cut into banded form, and when cooled to A,, banded austenite is transformed into banded pearlite. This structure can be improved or eliminated by increasing the final rolling temperature, increasing the forging ratio or diffusion annealing and normalizing. (3) The banded structure caused by component segregation is difficult to eliminate by heat treatment. This segregation is usually mitigated to some extent by normalizing, which normally corrects the segregation to an allowable level. If the banded tissue is serious, it can be improved by normalizing many times. The most reliable method is the first high-temperature diffusion annealing, followed by a normalizing, which can achieve the effect of completely eliminating the banded structure, but the cost will be very high, for the steel plate is limited by the surface quality, it is difficult to achieve.

2023-05-26

How to prevent deformation of seamless square tube

Seamless square tubes bear different load forms, and the degree of tightness of bearing fit should also be different. When bearing a fixed load, the fit should be looser to make the bearing more convenient to assemble and disassemble mechanically, but not too loose, otherwise it will cause Sliding on the mating parts will wear the mating surface. Therefore, transition fit or clearance fit with very little clearance should be generally selected. When the seamless square tube is subjected to a rotating load, a tighter fit should be selected to prevent the ferrule from sliding on the mating parts and cause wear on the mating surface, but the interference should not be too large, otherwise the internal clearance of the bearing will be reduced. Even disappear completely, excessive contact stress is generated, which leads to accelerated shaft wear and affects its service life. When the seamless square tube bears the swing load, the degree of tightness of the fit is generally the same as that of the seamless square tube when it bears the rotation load, or slightly tighter.

2023-06-11

Tianjin galvanized square rectangular tube manufacturers, the other uses and characteristics of the tube are introduced.

Tianjin Guangxin Iron and Steel Industry and Trade Co., Ltd., as a manufacturer of galvanized rectangular tubes in Tianjin, will introduce the use and characteristics of rectangular tubes today. We need to check the surface of the rectangular tube. If there is scarring on the surface, it means that the raw materials used in the square tube are not good and the impurity content is relatively high, which leads to scarring. This phenomenon can be found only by careful observation. Also check the surface lines of galvanized square pipes. Good product lines are evenly distributed and no cracks will occur. If cracks are found, it indicates that the quality of the raw materials used is too poor

2023-04-19

Seamless rectangular tube heat treatment has three advantages

In order to improve the surface hardness and wear resistance of the rectangular tube, seamless square rectangular tube manufacturers can carry out some surface treatment, that is, flame surface quenching, high and medium frequency surface quenching and some chemical heat treatment. Generally speaking, high and medium frequency surface quenching is mostly, and its heating temperature is 850-950 ℃. Considering its poor thermal conductivity, the heating speed cannot be too fast, otherwise it will produce defects of melting and some quenching cracks. High-frequency quenching requires seamless square tube after normalizing the matrix tissue is mainly pearlite. Cooling water spray or spray polyvinyl alcohol aqueous solution, tempering temperature in the range of 200-400 ℃, hardness in the 40-50HRC, can ensure the hardness and wear resistance of the surface of the seamless rectangular tube. In addition, seamless rectangular tube heat treatment also has the following three advantages: (I) Dimensional Stability For high-precision seamless rectangular tubes, it requires high precision, so dimensional stability must be maintained. Due to the slow cooling speed of straightening in the air, it has the effect of stabilization and will increase the number of residual seamless rectangular tubes in the organization, so cold treatment must be carried out; (II) Reduce Quenching Deformation Because seamless rectangular tubes are slender, they are easy to deform during quenching, so their deformation must be strictly controlled. Heat treatment is a very critical process. In the quenching and cooling process, cold plasticity is used for timely correction, which is the key step to ensure the improvement of the qualified rate. Therefore, thermal bath quenching or cooling in oil for a certain period of time should be carried out for thermal correction. At the same time, hanging heating should be carried out during heating to reduce the deformation of quenching. For high-precision guide rails, gas nitriding or ion nitriding should be carried out to reduce the deformation; (III) high hardness seamless square rectangular tube mainly bear contact fatigue load, it must have high hardness, so it should be quenched, or surface quenching or chemical heat treatment, followed by low temperature tempering treatment.